Centrale FEU & GAZ à 8 voies en rail DIN
The CM-80T5N is a programmable control unit designed to operate with up to 136 4-20 mA gas detectors and to manage up to 16 input/output modules. It is supplied for DIN rail mounting and powered at 24 VDC from an external EAE power supply. It offers straightforward programming via push buttons or the ProgSIM2 software, together with an alphanumeric display, allowing alarm and pre-alarm set points to be defined for each detector. Front-panel LEDs and a buzzer summarise the status of the system (alarm and fault). The high-level graphical software simplifies the set-up and commissioning of the CM-80T5N. An extensive library of configurations makes it easy to get started. Custom messages can be configured. It is certified ATEX II 1 G (zones 0, 1 and 2) and SIL2 for applications where operational safety is paramount.
Applications
Industries agroalimentaires
Industries chimiques
Waste treatment
Industries métallurgiques
Raffineries
The CM-80T5N is a programmable control unit designed to operate with up to 136 4-20 mA gas detectors and to manage up to 16 input/output modules. It is supplied for DIN rail mounting and powered at 24 VDC from an external EAE power supply. It offers straightforward programming via push buttons or the ProgSIM2 software, together with an alphanumeric display, allowing alarm and pre-alarm set points to be defined for each detector. Front-panel LEDs and a buzzer summarise the status of the system (alarm and fault). The high-level graphical software simplifies the set-up and commissioning of the CM-80T5N. An extensive library of configurations makes it easy to get started. Custom messages can be configured. It is certified ATEX II 1 G (zones 0, 1 and 2) and SIL2 for applications where operational safety is paramount.
| Mechanical | |
Dimensions (L x H x P) |
184 x 125 x 64 mm |
Poids (hors batteries) |
400 g |
Couleur |
Gris |
Matériau |
ABS |
Fixation |
Rail DIN |
| Electrical | |
Tension d’alimentation |
Nominal 24 VCC (10 à 32 VCC) |
Consommation |
1,2 W max. |
Sorties relais |
2 relais 800 mA / 60 V |
Sorties surveillées |
2 monitored loops |
Entrées analogiques |
8 entrées 4-20 mA (0-21,5 mA) |
Entrées digitales |
2 entrées opto-isolées |
| Environnementales | |
Protection rating |
IP20 |
Température en fonctionnement / stockage |
0°C to +55°C / -20°C to +70°C |
Humidité en fonctionnement / stockage |
≤ 90% HR / ≤ 90% HR |
Gamme DUST |
GAS DETECTORS |
DUST-AD, DUST-DY |
Gamme TMP2 |
TEMPERATURE PROBES |
TMP2-D-A2-R-1-A |
Gamme REM-485 |
MODULES OPTIONNELS |
REM-485-T0, REM-485-T0-B |
Note : |
The CM-20 control panel is programmed using push buttons or the ProgSIM2 software. |
Module 12 relais
REM-485-T0
Module 8 sorties 1A + 4 relais
REM-485-T1
Module 8 entrées analogiques 4-20 mA
REM-485-T2
Interconnection board for open collector or open emitter outputs REM-D15
Interconnection board for 4-20 mA inputs
REM-D25
